Maintenance of aerosols 

Before mounting the device should be good hand washing to avoid risk of infection. Cleaning and disinfection should always be performed when the bulbs are not connected to the unit. It 'important to do both those things after each treatment and before use. 

At the end it is necessary to clean all components, except the device itself and the pipe to the air, placing them for 5 minutes in hot water (60 ° C) to remove any remaining medicine. Comunue is recommended to follow the cleaning and sterilization indicazionidi that the manufacturer must state sula accompanying documentation. 

Finally, rinse under running water. All components of the bulbs, after being washed, may be immersed in a disinfectant solution cold type or Amuchina ® Milton ® to prevent bacterial contamination. You can disinfect the components of the bulbs also boil them in water for a maximum of 10 minutes provided the material to support the operation (see manual). The device can be hand washed with a cloth soaked in detergent. When all parts have been cleaned can be dried with a soft cloth and re-mounted. 

Keep the ampoule in a closed container to prevent contact with infectious microorganisms that can cause lung infections. 

Always check that the outlet hole of the compressed air is not obstructed. Do not use pins or other sharp instruments that could change the size of the hole and the size of the particles released. 

The filters of air-based nebulizer or compressor must be changed regularly to reduce the risk of bacterial contamination. 

The compressor nebulizers of tires must be reviewed as specified by the manufacturer.